Polyurethane Adhesives for Ship Outfitting
A full range of marine bonding adhesives for ocean-going shipbuilding — deck flooring, interior fit-out, weld-pin bonding, high-temperature insulation, rock-wool composite panels and fire doors. Low-flame-spread, low smoke-toxicity formulas tested to GB 8624 / GB 20285 and backed by a CCS certificate.
One marine adhesive range for the whole vessel
For ocean-going shipbuilding, PUGLUE produces a complete family of marine adhesives — PU deck-flooring adhesive, flame-retardant white glue and putty, weld-pin (stud) adhesive, high-temperature insulation adhesive and single-component rock-wool composite-panel adhesive. They bond PVC flooring, deck dressing, interior decoration, fireproof insulation, rock wool, metal bulkheads and fire doors with high strength and easy on-board application. Critically for marine fit-out, the products are flame-retardant and low-smoke: nine indicators including smoke-toxicity meet GB/T 20285-2006 within the GB 8624-2006 type-test report, with a low-flame-spread test report from the Shanghai Far-East Fire Testing Centre and a CCS (China Classification Society) certificate.
The Marine Adhesive Range
Six purpose-built adhesives covering structural bonding, interior fit-out and fire protection on board.
Marine Deck-Flooring Adhesive
A polyurethane adhesive that bonds PVC flooring sheet to ship steel plate, deck dressing (underlay) and cement floor screeds.
Flame-Retardant White Glue & Putty
For ship interior decoration. Strong bond with good freeze-, water-, oil- and ageing-resistance, and easy on-board application.
Weld-Pin (Stud) Adhesive
Bonds insulation weld-pins / studs to cabin and compartment bulkheads — high bond strength, simple to apply.
High-Temperature Insulation Adhesive
Bonds fireproof thermal-insulation material to bulkhead panels in compartments that run hot.
Rock-Wool Composite-Panel Adhesive
Single-component PU that bonds rock wool to metal sheet in shipbuilding — manual application, room-temperature cure, and as fast as a 3-minute heat cure.
Marine Fire-Door Adhesive
Bonds the core and facings of marine fire doors, completing the range’s fire-protection coverage on board.
Where PUGLUE Marine Adhesives Are Used
From the engine room to the accommodation block, the range covers structural, interior and fire-protection bonding throughout the vessel.
Marine Adhesive Range at a Glance
Pick the adhesive by the bond you need — all part of one flame-retardant, low-smoke marine range.
| Product | Type | Bonds | Notes |
|---|---|---|---|
| EP-06 Deck-Flooring Adhesive | Polyurethane | PVC flooring → steel deck plate / deck dressing / cement floor | Marine floor & deck bonding |
| JN-2 Flame-Retardant White Glue & Putty | Flame-retardant | Ship interior decoration | Freeze-, water-, oil- & ageing-resistant; easy to apply |
| EP-09 Weld-Pin Adhesive | Structural | Insulation studs / weld-pins → cabin bulkheads | High bond strength, simple to apply |
| GW-03 High-Temperature Adhesive | Heat-resistant | Fireproof insulation → bulkhead panels | For hot compartments |
| Rock-Wool Composite-Panel Adhesive | 1-component PU | Rock wool → metal sheet | Manual; RT cure; as fast as 3-min heat cure |
| Marine Fire-Door Adhesive | Fire-rated | Fire-door core & facings | Completes on-board fire protection |
Tell us the substrates and the certificate you need — we’ll match the right adhesive and send its datasheet.
Tested for Marine Fire Safety
Marine fit-out demands fire-safe materials. The range is type-tested for flame spread and smoke toxicity and carries a CCS certificate.
GB 8624-2006
Type-test report for the combustion performance classification of building materials.
GB/T 20285-2006
Nine indicators including smoke toxicity meet the standard — critical for enclosed ship interiors.
Low Flame Spread
Low-flame-spread test report from the Shanghai Far-East Fire Testing Centre.
CCS Certificate
Certificate from the China Classification Society (CCS) for marine use.
A Marine Adhesive Manufacturer You Can Build On
A dedicated polyurethane & flame-retardant adhesive manufacturer — not a trading reseller — supplying shipyards and outfitters with a certified marine range.
One certified range
Structural, interior and fire-protection bonding from a single supplier with marine fire certificates.
Full technical support
Datasheets, free trial samples and substrate / application guidance for your shipyard.
OEM & private label
Manufacturer-direct pricing, your branding and stable supply — no middleman.
Frequently Asked Questions
Marine & shipbuilding adhesives — technical answers.
Which adhesives are in the marine range?
Six: EP-06 deck-flooring adhesive, JN-2 flame-retardant white glue & putty, EP-09 weld-pin (stud) adhesive, GW-03 high-temperature insulation adhesive, a single-component rock-wool composite-panel adhesive, and a marine fire-door adhesive.
Are the marine adhesives fire-tested?
Yes. Nine indicators including smoke toxicity meet GB/T 20285-2006 within the GB 8624-2006 type-test report, with a low-flame-spread test report from the Shanghai Far-East Fire Testing Centre and a CCS (China Classification Society) certificate.
What does the EP-06 flooring adhesive bond?
EP-06 is a polyurethane adhesive that bonds PVC flooring sheet to ship steel plate, deck dressing (underlay) and cement floor screeds.
How fast does the rock-wool panel adhesive cure?
The single-component PU rock-wool composite-panel adhesive is applied by hand and cures at room temperature; with heat it can cure as fast as three minutes.
What is the weld-pin adhesive used for?
EP-09 bonds insulation weld-pins / studs to cabin and compartment bulkheads with high bond strength and simple application — an alternative to welding studs in some areas.
Can you supply for OEM / private-label marine projects?
Yes — we are the manufacturer, so we offer manufacturer-direct pricing, private-label branding and stable supply, with datasheets and free trial samples to validate the bond first.
Related Adhesives & Guides
Matched PU and fire-protection adhesives from the PUGLUE range.